Output voltages are (13.2 VDC Float, 13.6 VDC Normal, and 14.4 VDC Boost) The multi-stage charge technology is built-in to the converter. For additional photos, check out our converter upgrade link. All kits have built-in 3 or 4-stage charging and 100% filtered DC output. Most of the time, you’ll be able to troubleshoot and fix the issue yourself without too many issues.Available in 35, 45 or 55 Amp models, Our upgrade kits are designed to replace Magnetek, B-W Manufacturing, Magnetek and Parallax 6300 or 7300 or 8300 Series lower converter-charger sections. If all of these things seem to be in working order, then it’s time to call a professional. If your Magnetek 6345 isn’t charging the batteries, then there are a few things you can try to fix the problem They will be able to diagnose the problem and get it fixed for you. If you have tried all of these things and the unit still isn’t charging the batteries, then it’s time to call a professional. If you don’t feel comfortable replacing it yourself, you can take it to a professional to troubleshoot the issue further. You can find replacement units online or at most RV dealerships. This is a relatively simple job that you can do yourself, but make sure you get a unit that is compatible with your RV. If you’ve checked all of the above and you’re still having problems, then it’s time to replace the Magnetek 6345. This is a job for a professional, so make sure you call someone if you’re not comfortable doing it yourself. However, if the wires are damaged or frayed, you’ll need to replace them. If you notice loose wires, you can try tightening them. Make sure all of the connections are tight and that there is no damage to the wires, especially those running to and from the inverter. If all of the above is working properly, then the next thing to check is your wiring. This usually happens with the wires that are running to the batteries or the unit itself. One of the main reasons a Magnetek 6345 malfunctions is because of a loose connection. Magnetek is a well-known brand that produces quality products, but that doesn’t mean that sometimes you may deal with faulty equipment. You can also try resetting it by disconnecting and reconnecting the power. Make sure all of the connections are tight and that there is no corrosion or damage to the unit. If the batteries seem to be fine, then the next thing to check is the unit itself. It’s probably time to replace them so that all systems work properly. In addition, most RV batteries are only made to last about 5 years, so if your batteries are this old or older, you’re lucky. If your batteries are regularly draining below 50% and you can’t seem to get them charged up, it’s time to replace them. RV batteries should never be allowed to drain below 50% because it significantly shortens their lifespan. If everything looks good there, try charging them with a different charger to see if that works. Make sure they are properly connected and that there is no corrosion on the terminals. If the AC voltage is fine, then the next thing to check is the batteries themselves. This is especially true if you’re running multiple air conditioners simultaneously or using several appliances and electronic devices at the same time.ĭo a bit of research to find out how much power your particular RV needs to make sure you’re getting enough power. Just because your power source meets the minimum voltage requirements doesn’t mean it will power the inverter correctly (and will likely cause it to make a beeping noise). Power to your RV can be tricky because while the inverter requires a minimum of 103 volts, you still have to make sure there aren’t other appliances pulling too much electricity. Sometimes generators can have issues that will cause them not to provide enough power. If you are using a generator to power the Magnetek 6345, make sure it is working properly. You can check the voltage at the outlet to make sure it is within the proper range. If you are plugged into shore power, make sure the power source is working properly. You can use a multimeter to check the voltage if you’re not sure.Ĭhecking your RV’s power sources include checking either shore power or the generator you’re using. If the voltage is below that, the unit won’t charge the batteries.Ĭheck your RV’s power source or outlets to make sure the voltage isn’t too low before doing anything else. The minimum voltage required for this unit to work is 103 volts. Video can’t be loaded because JavaScript is disabled: Magnetek 6345 RV converter not charging the RV battery – how I fixed it () 1.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |